Laboratory Waste Incinerator Sierra Leone

medical waste incineration,hazardous waste incinerators

Items/Model TS30(PLC)
Picture

Brand/Code HICLOVER/N718
Burn Rate Average 30 kg/hour
Feed Capacity Average 60kg per feeding
Control Mode PLC(Programmable Logic Controller Incinerator)
Combustion Chamber 330L
Internal Dimensions 75x75x60cm
Secondary Chamber 180L
Smoke Filter Chamber Yes
Feed Mode Manual Feeding
Voltage 220V
Power 0.5Kw
Oil Consumption (kg/hour) Average 13.3
Gas Consumption (N.G, m3n/Hour) Average 16
Gas Consumption (L.P.G, m3n/Hour) Average 11.7
Temperature Monitor Four Digital Display
Temperature Protection Yes
Oil Tank 100L or More(Optional)
Feed Door 55x50cm
Chimney 5Meter or More(Optional)
Chimney Type Stainless Steel
1st. Chamber Temperature 800℃–1000℃
2nd. Chamber Temperature 1000℃-1200℃
Residency Time 2.0 Sec.
Gross Weight 4000kg
External Dimensions 175x120x140cm

HICLOVER Solution for Fighting COVID-19, with ISO9001:2015/CE(2006/42/EC,2014/30/EU) Certification.
1. Medical Waste Incinerator(Containerized Mobile Incinerator|Top Loading Incinerator)
2. Auto Roll Air Filter for Clean Room(Air Purification)

Nanjing Clover Medical Technology Co.,Ltd.
Tel: +86-25-8461 0201
Mobile: +86-138139 31455
WhatsApp: 008613813931455
WhatsApp: 008615380948599
Twitter ID: @hiclovercom
Wechat: 008613813931455 (ID: hiclovercom)
Wechat: +8615380948599 (ID: wasteincinerator)

Website1: www.hiclover.com
Website2: www.clover-incinerator.com
Email1: sales@hiclover.com
Email2: hicloversales@gmail.com
Email3: sales@clover-incinerator.com
Email4: cloverincinerator@gmail.com

Supply of a hospital waste / general waste incinerator, including auxiliaries, packaging and transport to Sierra Leone (FCA Incoterms) as well as installation and commissioning supervision.
The name plate capacities and attribute requirements are detailed below:
Retort type diesel fuelled incinerator rated at 120kg/h.
Primary and secondary burners with temperature range 850 to 1000 degrees Celsius.
Top mounted chimney, lined and painted externally with high temperature corrosion protection.
Burners and fan controller to be included. The incinerator should run automatically with minimal human intervention to operate.
Stack emissions shall be within the legislative requirements of Sierra Leone as a minimum.
Provision for any special tooling requirements.
Provision of 1 year of spares for services and maintenance.
Provision of any critical or long lead item spares. Human Cremation Equipment

The scope of service additional to the supply of the incinerator is as follows:
Provision for packaging the incinerator components into an ISO shipping container, including lashing as required and transporting to the nearest sea port (Basetek can do this if necessary, though).
FCA shipping to Sierra-Leone, Free-town (again Basetek can do this if necessary).
Supervision of installation and commissioning of the incinerator on site in Sierra Leone.
Flight costs to site.
Personnel Protective Equipment.

The following items are excluded from the scope of supply and services:
Transport of the incinerator equipment from Free-town to Sierra Leone Site
Customs clearance and duties.
Meals and accommodation shall be provided for while on site.
Passenger transport from Lungi (Freetown airport) to Sierra Leone site and return trip.
Marine insurances.

HICLOVER Incinerator/Parts Range Main Feature
Medical Waste Incinerators HICLOVER 10-500kgs/Hr.Double Combustion Chambers
Single Combustion Chamber Small, Cheap,10-20kgs/Hr.
Three Combustion Chambers(Optional) 3 Chambers for high risk waste
Pet Cremation Equipment For Pet(small/big) Cremation Business
Animal Incineration Equipment For other animal incineration

Feature
Specification

Incinerator
Auxiliary Fuel – Diesel

Type of Burner operation-Monoblock fully automatic burners

Primary Chamber

Type
Static Solid Hearth

Material of Construction
Mild Steel

Ash Removal
Manual

Waste feeding system
Manual

Secondary Chamber

Material of Construction
Mild Steel

Burner

Type
Monoblock fully automatic oil fired

Fuel
LP

Chimney

Material of Construction
Stainless Steel – 12 feet

Control Panel
Automatic temperature control

Hourly destruction capacity (kg/hr)
5 – 10

Volume of primary chamber (ft3)
1.5

Volume of secondary chamber (ft3)
2.5

Fuel consumption (kg/hr)
4 – 5

Basic dimensions (diameter x height in feet)
3 x 5

Weight (tons)
1

Burners
2

Power supply
230V, 50Hz

Items/Model TS10(PLC) TS20(PLC) TS30(PLC) TS50(PLC)
Brand HICLOVER HICLOVER HICLOVER HICLOVER
Burn Rate (Average) 10 kg/hour 20 kg/hour 30 kg/hour 50 kg/hour
Feed Capacity(Average) 20kg 40kg 60kg 100kg
Control Mode PLC PLC PLC PLC
Combustion Chamber 100L 210L 330L 560L
Internal Dimensions 50x50x40cm 65x65x50cm 75x75x60cm 100x80x70cm
Secondary Chamber 50L 110L 180L 280L
Smoke Filter Chamber Yes Yes Yes Yes
Feed Mode Manual Manual Manual Manual
Voltage 220V 220V 220V 220V
Power 0.5Kw 0.5Kw 0.5Kw 0.7Kw
Oil Consumption (kg/hour) 5.4–12.6 7.8–16.3 10.2–20 12.1–24
Gas Consumption (m3/hour) 6.2–11.4 8–15.7 9.8–20 9.9–26.1
Temperature Monitor Yes Yes Yes Yes
Temperature Protection Yes Yes Yes Yes
Oil Tank 100L 100L 100L 100L
Feed Door 30x30cm 45x40cm 55x50cm 70x55cm
Chimney 3Meter 3Meter 5Meter 5Meter
Chimney Type Stainless Steel Stainless Steel Stainless Steel Stainless Steel
1st. Chamber Temperature 800℃–1000℃ 800℃–1000℃ 800℃–1000℃ 800℃–1000℃
2nd. Chamber Temperature 1000℃-1200℃ 1000℃-1200℃ 1000℃-1200℃ 1000℃-1200℃
Residency Time 2.0 Sec. 2.0 Sec. 2.0 Sec. 2.0 Sec.
Gross Weight 1500kg 2200kg 3000kg 4500kg
External Dimensions 140x90x120cm 160x110x130cm 175x120x140cm 230x130x155cm
Items/Model TS100(PLC) TS150(PLC) TS300(PLC) TS500(PLC)
Burn Rate (Average) 100 kg/hour 150 kg/hour 300 kg/hour 500 kg/hour
Control Mode PLC Auto. PLC Auto. PLC Auto. PLC Auto.
Combustion Chamber 1200L 1500L 2000L 3000L
Internal Dimensions 120x100x100cm 150x100x100cm 170x120x100cm 210x120x120cm
Secondary Chamber 600L 750L 1000L 1500L
Smoke Filter Chamber Dry Scrubber Dry Scrubber Dry Scrubber Dry Scrubber
Feed Mode Manual Manual Manual Manual
Voltage 220V 220V 220V 220V
Power 1.38Kw 1.69Kw 2.57Kw 4.88Kw
Diesel Oil Consumption (kg/hour) Ave.20.4 Ave.24.2 Ave.33 Ave.44
Natural Gas Consumption (m3n/hour) Ave.24.5 Ave.29 Ave.39.6 Ave.52.8
Temperature Monitor Yes Yes Yes Yes
Temperature Protection Yes Yes Yes Yes
Oil Tank 200L 300L 500L 500L
Chimney 10Meter 10Meter 14Meter 14Meter
Chimney Type Stainless Steel Stainless Steel Stainless Steel Stainless Steel
1st. Chamber Temperature 800℃–1000℃ 800℃–1000℃ 800℃–1000℃ 800℃–1000℃
2nd. Chamber Temperature 1000℃-1200℃ 1000℃-1200℃ 1000℃-1200℃ 1000℃-1200℃
Residency Time 2.0 Sec. 2.0 Sec. 2.0 Sec. 2.0 Sec.
Gross Weight 6000kg 8500kg 11000kg 16000kg
External Dimensions 260x150x180cm 300x160x190cm 400x210x300cm 450x210x300cm

CE and ISO Certification Pass Incinerators

2021-03-02

Leave a Reply

Please log in using one of these methods to post your comment:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

%d bloggers like this: